Email:Louis@lithmachine.com
ItemNo :
LITH-JBT-30LMOQ :
1Compliance:
CEWarranty:
2 yearsDelivery Time:
5 daysEmail :
Louis@lithmachine.com
30L Transfer Tank for Planetary Vacuum Mixer
Applicable Scope
After the mixer completes slurry preparation, tilt the 30 L bucket to the elevator, cover with the mixing head to form the slurry transfer tank. This facilitates transferring slurry from the mixing room to the storage and coating room. The slurry is conveyed to the main tank or coating head via conversion fittings.
Container Parameters
l Design total volume: 45 L
l Effective volume: 15–30 L
l Container inner diameter: 400 mm
l Container inner depth: 360 mm
l Contact material: SS 304
l Temperature-jacket configuration: single-layer jacket on tank wall for heating/cooling; single-layer jacket on bottom for heating/cooling
l Jacket connection: G 1/2″ quick-connect union, rated ≤0.4 MPa
l Jacket circulation: customer-supplied; inlet water ≤8 °C, flow >15 L/min
l Discharge port: one G 1″ three-piece ball valve at bottom; with 1″ standard ISO quick clamp
l Operating ambient temperature: –10 °C to +120 °C
l Mobility: mounted on casters
l Interchangeable with 30 L mixer bucket
Mixing Components
l Operating frequency: 50 Hz
l Mixing power: 0.75 kW (one unit)
l Mixing speed: 48 rpm (fixed)
l Impeller diameter: 380 mm
l Impeller type: inclined-paddle spiral
l Impeller material: SS 304
l Impeller tip speed: 1.0 m/s
l Number of impellers: 1
l Number of shafts: 1
l Clearance from impeller to tank wall: 10 mm
l Clearance from impeller to tank bottom: 8 mm
l Principle: unique inclined-paddle design prevents material sedimentation
Top Lid Components
l Lid material: SS 304
l Feed inlet: one ISO standard 1″ quick-connect
l Viewing ports: two DN50 tempered-glass sight glasses
l Vacuum module: one set with G 3/4″ connections (vacuum and vent)
l Mechanical vacuum gauge port: one Y60 mechanical gauge
Control System
l Electrical cabinet: houses inverter and low-voltage components
l Manual control panel: includes buttons, knobs, instruments
l Power supply: AC 3×380 V ±5%, 50 Hz
l Control method: electrical control
l Operation: button + knob panel on electrical cabinet
l Emergency stop: one button
l Start button: one
l Stop button: one
l Worklight switch: one
Safety Interlock System
Emergency stop: pushes E-stop, machine halts immediately; no further operation
Other Notes
l Oil seals: domestic brand; static seal by O-ring, dynamic by mechanical or skeleton seal
l Lubricant grease: domestic
l Valves: domestic
l Vacuum requirements: customer-supplied vacuum system at 8 L/s (2×8)
l Vacuum retention: –0.098 MPa, must hold >–0.085 MPa for 24 h without leakage
l Main power: >1 kW
l Total weight: approx. 250 kg
l Dimensions: L 594 mm × W 560 mm × H 1420 mm
l Color: off-white
l Load-bearing floor: 400 kg/m²
|
No. |
Name |
Specification |
Material |
Quantity |
Remarks |
|
1 |
Lid sealing O ring |
ΦD×ΦN |
Silicone |
1 |
Matches model; per supplier’s standard |
|
2 |
Sight-glass sealing O ring |
— |
Silicone |
2 |
Matches model; per supplier’s standard |
|
3 |
Feed port sealing gasket |
— |
Silicone |
1 |
Matches model; per supplier’s standard |
|
4 |
Sight-glass pane |
tempered |
Glass |
2 pcs |
Matches model; per supplier’s standard |
|
No. |
Item |
Requirement |
|
5 |
Workshop Height |
> 3.0 m; allows lifting for maintenance; floor clean and level |
|
6 |
Door Opening |
Height > 2.0 m; Width > 1.5 m; ensures machine transport |
|
7 |
Cooling Water |
Ensure cooling; ideally with forced supply; in winter, provide hot water |
|
8 |
Heating |
In cold climates, maintain room > 20 °C so hydraulic oil does not solidify; ensures smooth lifting and lubrication |
|
9 |
Installation Space |
Arrange per layout drawings |
|
10 |
Air Supply |
5–7 kgf/cm², 50 L/min; for pneumatic pumps etc. |
|
11 |
Others |
No corrosive or explosive gases/liquids |
1 Standard exported package: Internal anticollision protection, external export wooden box packaging.
2 Shipping by express, by air, by sea according to customers' requirements to find the most suitable way.
3 Responsible for the damage during the shipping process, will change the damaged part for you for free.
DELIVERY TIME:15-20 days after confirming the order, detail delivery date should be decided according to
production season and order quantity.
Cylindrical Cell Hydraulic Sealer Sealing Machine Optional: 32650, 26650, 21700, 18650, CR123, AA, AAA
Semi-Auto Winding Machine For Electrode Assembly Of Cylindrical Battery
Subscribe to us
ONLINE
Louis@lithmachine.com
+0086 15959378975
