Email:Louis@lithmachine.com
ItemNo :
LITH-JBT100MOQ :
1Compliance:
CEWarranty:
2 yearsDelivery Time:
5 daysEmail :
Louis@lithmachine.com
100L Tiltable Slurry Transfer Vessel for Post-Mixing Operations
Application Scope
After the slurry is prepared by the mixer, the bucket is moved to the lifting machine, covered with a mixing head to form a transfer tank. This setup completes slurry transfer from the mixing area to storage or coating area. The slurry is delivered to the main storage tank or coater via quick-connect adapters.
Container Parameters
l Design Total Volume: 140 L
l Effective Volume: 45–100 L
l Inner Diameter: 596 mm
l Inner Depth: 500 mm
l Material (contacting with medium): SS304
l Jacket Type: Single-layer on side and bottom, for heating or cooling
l Jacket Connection: G3/4″ quick coupling, pressure ≤0.4 MPa
l Jacket Circulation: Customer-supplied; inlet ≤8 °C, flow >40 L/min
l Discharge: One G1-1/2″ three-piece ball valve at bottom with 2″ ISO quick coupling
l Ambient Temperature: –10 °C to +120 °C
l Movement: On casters
l Interchangeable with 100 L mixer bucket
Mixing Components
l Frequency: 50 Hz
l Mixing Motor Power: 1.1 kW (1 unit)
l Mixing Speed: 42 rpm (fixed)
l Impeller Diameter: 576 mm
l Impeller Type: Inclined paddle screw strip
l Material: SS304
l Tip Speed: 1.2 m/s
l Number of Impellers: 1
l Number of Shafts: 1
l Clearance (impeller to wall): 10 mm
l Clearance (impeller to bottom): 8 mm
l Principle: Prevents sedimentation with unique impeller design
Top Cover Components
l Material: SS304
l Feed Port: ISO standard quick coupling 1″ ×1
l Sight Glasses: DN80 tempered glass ×2
l Vacuum Port: G3/4″ ×1 set (vacuum/vent)
l Digital Vacuum Gauge Port: M14×1.5 internal thread ×1
l Control System
l Cabinet: Houses inverter and low-voltage components
l Manual Panel: Buttons, knobs, instruments
l Power: AC 3×380 V ±5%, 50 Hz
l Control: Electrical
l Operation: Cabinet panel with buttons/knobs
l Emergency Stop: 1
l Start Button: 1
l Stop Button: 1
l Work Light Switch: 1
Safety Interlock System
Emergency Stop: Immediately halts the system; prevents any further operation
Other Notes
l Seals: Domestic brand; static by O-ring, dynamic by mechanical or skeleton seal
l Grease: Domestic
l Valves: Domestic
l Vacuum Requirement: Customer to supply vacuum system, 8 L/s (2X-8)
l Vacuum Retention: –0.098 MPa; holds >–0.085 MPa for 24 h without leakage
l Main Power: >1 kW
l Weight: Approx. 250 kg
l Dimensions: L830 mm × W830 mm × H1474.5 mm
l Color: Ivory white
l Floor Load: 400 kg/m²
|
No. |
Name |
Specification |
Material |
Quantity |
Remarks |
|
1 |
Top Lid Seal Ring |
ΦD×ΦN |
Silicone |
1 |
Matched to model, per supplier standard |
|
2 |
Sight Glass Seal Ring |
— |
Silicone |
2 |
Matched to model, per supplier standard |
|
3 |
Feed Port Gasket |
— |
Silicone |
1 |
Matched to model, per supplier standard |
|
4 |
Sight Glass Pane |
Tempered |
Glass |
2 pcs |
Matched to model, per supplier standard |
|
No. |
Item |
Standard Requirement |
|
5 |
Workshop Height |
>3.0 m; ensure lift space and maintenance clearance; floor must be clean, level |
|
6 |
Door Dimensions |
Height >2.0 m; Width >1.5 m; ensure equipment can pass through |
|
7 |
Cooling Water |
Must meet cooling demand; forced cooling preferred; heating in winter optional |
|
8 |
Heating |
Maintain >20 °C in winter to avoid hydraulic oil solidifying; ensure lubrication |
|
9 |
Installation Space |
Follow layout drawing |
|
10 |
Air Supply |
5–7 kgf/cm², 50 L/min; for pneumatic pump and other uses |
|
11 |
Other |
No corrosive/explosive gases or liquids |
1 Standard exported package: Internal anticollision protection, external export wooden box packaging.
2 Shipping by express, by air, by sea according to customers' requirements to find the most suitable way.
3 Responsible for the damage during the shipping process, will change the damaged part for you for free.
DELIVERY TIME:15-20 days after confirming the order, detail delivery date should be decided according to
production season and order quantity.
Cylindrical Cell Hydraulic Sealer Sealing Machine Optional: 32650, 26650, 21700, 18650, CR123, AA, AAA
Semi-Auto Winding Machine For Electrode Assembly Of Cylindrical Battery
Subscribe to us
ONLINE
Louis@lithmachine.com
+0086 15959378975
