Email : Louis@lithmachine.com
ItemNo :
LITH-TF200MOQ :
1Warranty:
2 yearsDelivery Time:
5 daysEmail :
Louis@lithmachine.com3-in-1 Hot Sealer for Pouch Cell Preliminary Top/Side Sealing & Final Vacuum Sealing, and Vacuum Standing
It is designed for Li-S pouch cell preparation in glove-box for the space saving.
SPECIFICATIONS:
Model
LITH-TF200
Structure
Standard split unit
Control unit is outside glovebox
Sealing Mode (Top，Side and vacuum ):
· LITH-TF with Rubber Sealing blade and Manual Footswitch is specially designed for hot sealing the top side of the pouch cell with the tab extruded. Unlike hard type sealing blade, the soft type sealing blade is able to eliminate the sealing gap caused by the battery taps.
· Vacuum Sealing Mode: After electrolyte injection, The device is able to perform the final vacuum sealing for the pouch cell.
· Vacuum Standing Mode: After the vacuum sealing, The device is able to do the vacuum standing for the electrolyte diffusion and degassing. The vacuum timer would be used for the standing time control.
Max. Sealing Dimensions
200mm(L) x 150mm(W)
Edge Sealing Width
5mm
Sealing Blade
Soft type (with rubber, suitable for sealing case with tab in between)
Power Supply
110V or 208-240V selectable, Single Phase 50/60Hz
Max. Power
600W
Vacuum Level
· -90 kPa Max.
· The vacuum pump is not included.
Sealing Pressure
· 0~7Kg/cm² adjustable: Vacuum chamber lid and sealing die to need to be driven gas, Recommended driven gas pressure 60 psi.
· Please use high purity inert gasses (Ar or N2), when operating in the glovebox. Using Air Compressor driven when operating outside the glove box.
· Air Compressor and fitting are not included.
· Attention: If a gas cylinder is used instead of air compressor, a two-stage pressure regulator must be installed on the gas cylinder to limit the pressure within the required working range for safe operation.
Sealing Temperature
50 - 250°C adjustable with control accuracy of +/-2°C
Heating Timer
0 - 99 seconds Adjustable
Glove Box Compatibility
It can be used in glove box. Please use Inert gas when operating in the glove box.
Compliance
· CE Certified
Warranty
One Year limited warranty with lifetime support
Product Dimensions
· MSK-115-III
· Chamber Closed: 470mm(L) x 430mm(W) x 480mm(H)
· Chamber opened: 470mm(L) x 430mm(W) x 560mm(H)
· Control Unit: 420mm(L) x 320mm(W) x 220mm(H)
Net Weight
150 lbs
Shipping Weight & Dimension
215 lbs; 48"x40"x29"
Features
Pouch Cell Process: Tube Furnace/ Muffle Furnace→ Vacuum Mixing→ Electrode Coating→ Roll press→ Electrode Cutting→ Vacuum Drying→ Cases Forming→ Top&Side Sealing→ Electrolyte Filling→ Vacuum Sealing→ Battery Analyzer
For the pouch cell assembly, we also recommend you the following items:
PACKAGE:
1 Standard exported package: Internal anticollision protection, external export wooden box packaging.
2 Shipping by express, by air, by sea according to customers' requirements to find the most suitable way.
3 Responsible for the damage during the shipping process, will change the damaged part for you for free.
DELIVERY TIME:15-20 days after confirming the order, detail delivery date should be decided according to
production season and order quantity.
Subscribe to us
ONLINE
Louis@lithmachine.com
+0086 15959378975
