Products
Home Products Battery Large Production Line Pouch Cell Machine

Combined Die Cutting And Stacking Equipment For Lithium Batteries

Product Categories

Contact Us

  • Contact Person : Louis Yang
  • Email : Louis@lithmachine.com
  • Address : No. 5 Nanshan Road, Huli District, Xiamen City, Fujian Province, China
Combined Die Cutting And Stacking Equipment For Lithium Batteries

Combined Die Cutting And Stacking Equipment For Lithium Batteries

  • Product Details

Combined Die Cutting And Stacking Equipment For Lithium Batteries


Feature

This equipment is mainly used for automatic unwinding, automatic deflection, tension control, CCD defect detection, driving, cutting and forming rounded corners, iron and dust removal, CCD size detection, NG rejection, vacuum belt conveying, CCD pre-positioning, diaphragm unwinding, stacking table according to the set number of layers into cores, diaphragm cutting and gluing, discharging, etc.; the final cores are loaded in pallets and can be Docking automatic logistics line and MES system, etc.


Specification

Project

Parameters

Positioning method

CCD positioning

Stacking efficiency

Single station 0.6(whole machine 0.2)s/pcs

Auxiliary time

<10s

Burr size

Va12um ; Vbs12um

Die life

1. Can be used ≥ 1,500,000 times after each mold repair; 2. Mold can be repaired ≥ 10 times.

Alignment accuracy between poles and diaphragm

Centre deviation ±0.3mm

Diaphragm end-face alignment accuracy

±0.4mm

Alignment accuracy between adjacent diaphragms

±0.3mm

Overall alignment accuracy

King 0.5mm

Number of laminations

Settable within the thickness adaptation range

Outer diaphragm

No tail roll

Die-cutting pass rate

99.5%

Qualified rate of laminations

99.5%

Overall machine qualification rate

99%

Cranking rate

98%

Dimension

W13000mm x L5000mm x H2700mm

Weight/load

Approx. 35000Kg; >800Kg/M-2

Power supply

AC380V three-phase;voltage fluctuation±10%;power:120KW;frequency:50Hz

Compressed air

0.5~0.7Mpa(5~7kgf/cm2),dosage 3000L/min

 

Item

Specification

 





Punching method

Hardware Die Punching

Material system

Continuous coated pole rolls with formed pole lugs

Roll diameter

≤∮800mm

Inner diameter of reel

3"/6"

Pole winding error

2mm

Serpentine bend error

1mm/m

Difference in height of wavy edge

<2mm

Thickness T

5~20mm

Width W

80~200mm

Length L

120~300mm

Length L1 of the tabs

10~30mm

Orientation of the tabs

Ipsilateral/heterolateral


Production Assembly Plant




pouch cell final Sealing Machine








PACKAGE:

  1 Standard exported package: Internal anticollision protection, external export wooden box packaging.

  2 Shipping by express, by air, by sea according to customers' requirements to find the most suitable way.

  3 Responsible for the damage during the shipping process, will change the damaged part for you for free.

 

DELIVERY TIME:15-20 days after confirming the order, detail delivery date should be decided according to 

production season and order quantity.