ItemNo :
LITH-QZT400MOQ :
1Compliance:
CEWarranty:
2 yearsDelivery Time:
5 days
Automatic Pouch Cell Edge Trimming Folding and Ironing Machine (400)
I. Equipment Action Principle
The cutting, folding and ironing three-in-one machine is a piece of equipment that integrates the three processes of cell trimming, edge folding and edge ironing.
Operating principle: this equipment consists of five mechanisms, namely the cell correction and positioning mechanism, the trimming mechanism, the edge-folding mechanism, the edge-ironing mechanism, and the robotic automatic pick-and-place device; after manual loading and cell correction/positioning, both hands press the dual start buttons, the equipment runs, and the cell undergoes trimming, edge folding and edge ironing. After ironing, the ironing mechanism opens, and the cell fixture returns to its starting position. The cell is removed manually.
II. Applicable Cells
Cell length: 20~~375 mm
Cell width: 15~~155 mm
Cell thickness: 5~15 mm
III. Equipment Diagram
IV. Equipment Operating Environment
1. Ambient temperature: 10~40 ℃
2. Relative humidity: 20~90 %
3. The gas supply must be a non-corrosive gas or liquid, and non-explosive gases.
Ⅴ. Equipment Feature
1. Supports both single and double folding operations.
2. Cutting knives rotate synchronously in opposite directions, ensuring high trimming accuracy; knife life exceeds 1.5 million cycles.
3. All four main mechanisms can be adjusted simultaneously for in‑and‑out motion, providing flexible operation.
4. Multiple products can be loaded at once, enhancing production efficiency.
5. Manual and automatic modes are available.
6. Position adjustments for each mechanism are guided by linear slide rails.
7. Folding wheels are made of tool steel, offering excellent wear resistance.
The cutting knife and fixture operating speeds, as well as the edge‑heating temperature, are all adjustable.
Ⅵ. Technical Parameters
|
Category |
Technical Specification |
Parameter/Requirement |
|
Applicable Cell Dimensions |
Length |
20 mm – 375 mm |
|
Width |
15 mm – 155 mm |
|
|
Thickness |
5 mm – 15 mm |
|
|
Environmental Conditions |
Ambient Temperature |
10 ℃ – 40 ℃ |
|
Relative Humidity |
20 % – 90 % |
|
|
Air Supply |
Non-corrosive gas/liquid, no explosive gases |
|
|
Equipment Precision |
Overall Precision |
± 0.05 mm |
|
Trimming Accuracy |
± 0.2 mm |
|
|
Efficiency |
Single Cycle Time |
6 – 8 seconds |
|
Overall Efficiency |
Dependent on manual loading/unloading speed and quantity per load |
|
|
Fixture |
Effective Length |
375 mm |
|
Pass Rate |
Machine Pass Rate |
≥ 98 % (excluding incoming material issues and operator error) |
|
Folding/Heating Requirements |
Double-Fold |
Edges must not extend beyond the cell body; folding and heating are completed in one step |
Ⅶ. Consumables Configuration
One set of cutting knives is provided, and one set of hex wrenches is included.
PACKAGE:
1 Standard exported package: Internal anticollision protection, external export wooden box packaging.
2 Shipping by express, by air, by sea according to customers' requirements to find the most suitable way.
3 Responsible for the damage during the shipping process, will change the damaged part for you for free.
DELIVERY TIME:15-20 days after confirming the order, detail delivery date should be decided according to
production season and order quantity.
Subscribe to us
ONLINE
+86 13174506016
Louis@lithmachine.com
+86 18659217588
18659217588
