Email:Louis@lithmachine.com
ItemNo :
LITH-XJZH500MOQ :
1Compliance:
CEWarranty:
2 yearsDelivery Time:
5 daysEmail :
Louis@lithmachine.com
500L Planetary Vacuum Mixing Machine for Lithium Battery Slurry Production
I. Equipment Features
Application Scope
l Applicable for mixing powders and liquids of various common glues, resulting in uniformly mixed material.
l Suitable for viscosity up to 1,200,000 cP.
II. Main Technical Parameters
Lower Vessel Assembly
- Total Designed Capacity: 650L
- Usable Volume: 150–500L
- Internal Diameter: 1000mm
- Internal Depth: 830mm
- Material (for Parts in Contact with Media): SS304
- Temperature Control Jacket Type: The barrel wall has a double-layer structure with an inner flow guide layer (for heating and cooling) and external thermal insulation; the bottom adopts a single-layer jacket.
- Jacket Connection Port: G1", equipped with G1" quick-connect fittings; jacket pressure limit: ≤0.4MPa
- Jacket Circulation System: Supplied by the customer. Recommended inlet temperature: ≤8°C; flow rate: ＞90L/min
- Discharge Mode: Not applicable
- Designed Ambient Temperature: -10°C ~ +120°C
- Portability: Mounted on casters
Mixing Unit
l Working Frequency: 5–50 Hz
l Mixing Power: 37 kW
l Stirrer Speed: 5–51 rpm
l Planetary Box Speed: 3–32 rpm
l Stirrer Diameter: 570 mm
l Stirrer Type: Straight frame with bottom scraping
l Stirrer Material: SS304
l Stirring Line Speed: 0.1–1.2 m/s
l Number of Stirrers: 2 pcs
l Clearance (Stirrer–Wall): 7±1 mm
l Clearance (Stirrer–Bottom): 3±1 mm
Wall Scraper Unit
l Scraper Bracket Material: SS304
l Scraper Blade Material: PTFE (Teflon)
l Scraper Speed: Same as planetary box
l Removability: Detachable
Base & Lifting Unit
l Material: High-rigidity structural carbon steel
l Lifting Method: Dual hydraulic cylinders
l Guiding: Dual metal guiding rods
l Stroke: ≤1100 mm
l Lifting Speed: ≥20 mm/s
Upper Vessel Unit
l Material: SS304
l Powder Inlet: DN150 flange – 1 pc
l Liquid Inlet: ISO quick clamp 1" – 1 pc
l Viewing Ports: DN165 tempered glass – 2 pcs
l Vacuum Port: G1" – 1 pc
l Nitrogen Port: G1/2" – 1 pc
l Exhaust Port: G1" – 1 pc
l Digital Vacuum Gauge Port: M14×1.5 (metric internal thread) – 1 pc
l Spare Port: G3/4" – 1 pc
Control System
l Electrical Cabinet: Houses inverters and low-voltage devices
l Manual Control Panel: Buttons, knobs, instruments
l Power Supply: AC 3×380V±5%, 50Hz
l Control Mode: Electrical + hydraulic
l Drive Control & Speed Regulation: Inverter control
l Cooling Mode: Air-cooled + liquid-cooled
l Operation Mode: Button and knob panel operation
l Digital Temp Display: Displays material temp
l Emergency Stop Button: 1 pc
l Alarm System: Over-temp alarm, shutdown alarm, alarm off
l Speed Display: Panel display
l Power Indicator: 1 pc
l Timer: 1 pc, controls mixing
Safety Interlock System
l Emergency Stop: Immediately halts all operation
l Low-Speed Mixing: Can operate while beam is lowering
l Running Lock: Cannot lift beam or open barrel during operation
l Vacuum Backflow Prevention: Special buffer tank prevents pump oil reflux
l Fault Stop: Inverter protection (overload, overcurrent, overvoltage, leakage, phase loss)
l Beam Lifting: Only operable after barrel is in place
l Beam Lifting Lock: Cannot lift unless vacuum is released
l High-Speed Mixing: Only after beam is fully lowered
l Safety Pin: Inserted in guiding rods after lifting for safety during maintenance
Other Notes
l Temperature Sensor: Pt100
l Measurement Method: Dynamic temp measurement via rotating probe inside barrel
l Bearings: High-speed (imported), low-speed (domestic)
l Seals: O-rings for static, mechanical seals for dynamic
l Lubrication Grease: Domestic brand
l Mechanical Seal Oil: Imported brand
l Hydraulic Cylinders: Domestic brand
l Hydraulic Station: Domestic brand
l Valves: Domestic brand
l Vacuum System Requirement: Supplied by customer, capacity ≥30L/S (2X-30)
l Vacuum Holding: -0.098 MPa, maintain above -0.085 MPa for 24 hrs
l Total Power: ＞40 kW
l Weight: Approx. 7000 kg
l Dimensions: L3240 × W1500 × H2938 mm (Raised: 3917 mm)
l Color: Beige
l Floor Load Requirement: ≥2100 kg/m²
III. List of Spare & Wear Parts
|
No. |
Name |
Spec |
Material |
Qty |
Note |
|
1 |
Upper Lid Seal Ring |
ΦD×ΦN |
Silicone |
1 |
Matched to model |
|
2 |
Viewing Port Seal Ring |
— |
Silicone |
2 |
Matched to model |
|
3 |
Inlet Seal Gasket |
— |
Silicone |
1 |
Matched to model |
|
4 |
Wall Scraper |
— |
Teflon |
1 |
Matched to model |
|
5 |
Viewing Glass |
— |
Tempered |
2 |
Matched to model |
IV. Installation Requirements
|
No. |
Item |
Standard Requirement |
|
1 |
Workshop Height |
>5.0 m – includes space for lifting & maintenance |
|
2 |
Door Size |
H >4.5 m, W >4.0 m – for equipment transportation |
|
3 |
Cooling Water |
Strong supply recommended; heating needed for winter |
|
4 |
Heating |
Room temp >20°C for stable lifting & lubrication |
|
5 |
Installation Space |
Refer to layout drawing |
|
6 |
Air Supply |
5–7 kgf/cm², 100 L/min |
|
7 |
Foundation |
Default: concrete base per drawing; optional floor install |
|
8 |
Environment |
No corrosive/explosive gases or liquids |
1 Standard exported package: Internal anticollision protection, external export wooden box packaging.
2 Shipping by express, by air, by sea according to customers' requirements to find the most suitable way.
3 Responsible for the damage during the shipping process, will change the damaged part for you for free.
DELIVERY TIME:15-20 days after confirming the order, detail delivery date should be decided according to
production season and order quantity.
Automatic Hydraulic Rolling Press Machine Battery Calender For Lithium Cell Production
Subscribe to us
ONLINE
Louis@lithmachine.com
+0086 15959378975
