Email:Louis@lithmachine.com
ItemNo :
LITH-XFZH-300LMOQ :
1Compliance:
CEWarranty:
2 yearsDelivery Time:
5 daysEmail :
Louis@lithmachine.com
300L Vacuum Planetary Mixer for Powder and Liquid Mixing and Disperding
I. Equipment Features
Application Scope
l Suitable for mixing and dispersing powder and liquid materials of various common batteries, producing uniformly mixed battery slurry; especially effective for high‑viscosity processes.
l Operating viscosity range: ≤ 1,200,000 cP
II. Main Equipment Parameters
Lower Barrel Component
l Design Volume: 395 L
l Effective Volume: 130 – 300 L
l Inner Diameter: 836 mm
l Inner Depth: 720 mm
l Material: 304 SS (contact parts)
l Jacket Type: Single‑layer jacket on wall & bottom for heating/cooling
l Jacket Interface: G1" with quick coupling; pressure ≤ 0.4 MPa
l Circulation: Customer‑supplied; inlet ≤ 8 °C, flow > 80 L/min
l Discharge: G1‑1/2" three‑piece ball valve
l Ambient Temp.: –10 °C … +120 °C
l Mobility: Caster‑mounted
Stirring Component
l Working Frequency: 5 – 50 Hz
l Stirring Power: 22 kW
l Paddle Speed: 3 – 38 rpm
l Planetary Speed: 2.6 – 26 rpm
l Paddle Diameter: 478 mm
l Paddle Type: Tapered spiral twist, 90° helix
l Material: 304 SS
l Tip Speed: 0.1 – 1.0 m/s
l Paddles / Shafts: 2 / 2
l Clearances (Paddle‑Paddle / Wall / Bottom): 7 ± 2.5 mm / 4 ± 1 mm / 4 ± 1.5 mm
Dispersing Component
l Working Frequency: 5 – 65 Hz
l Power: 30 kW
l Speed: 180 – 2340 rpm
l Disc Diameter: 190 mm
l Disc Type: Serrated
l Material: 304 SS
l Tip Speed: 1.8 – 23 m/s
l Discs / Shafts: 4 / 2
Scraper Component
l Frame Material: 304 SS
l Blade Material: PTFE (Teflon)
l Speed: Same as planetary
l Removable: Yes (remove for high‑viscosity)
Base & Lifting Component
l Material: High‑rigidity structural carbon steel
l Lifting Method: Hydraulic cylinder
l Guide: High‑precision linear rail
l Stroke: ≤ 820 mm
Upper Barrel Component
l Material: 304 SS
l Powder Port: Flanged DN150 – 1
l Liquid Port: ISO 1" quick clamp – 1
l Sight Glasses: DN110 tempered – 2
l Vacuum / Break‑Vac Port: ISO 1" quick clamp – 1
l N₂ Port: G3/4" – 1
l Exhaust Port: G1" – 1
l Vacuum Gauge Port: M14 × 1.5 internal – 1
l Breather Port: ISO 1" quick clamp – 1
Control System
l Electrical Cabinet: Houses inverter & low‑voltage devices
l Manual Panel: Buttons, knobs, meters
l Power Supply: AC 3 × 380 V ± 5 %, 50 Hz
l Control Mode: Electric + Hydraulic
l Drive / Speed: Inverter control
l Cooling: Air & liquid
l Operation: Panel buttons + knobs
l Digital Temp Display: Material temperature
l Emergency Stop: 1
l Alarm: Over‑temp alarm, auto shutdown, mute
l Speed Display: Panel meter
l Power Indicator: 1
l Timer: 1 (stir & disperse)
l Note: HMI option integrates all controls into touchscreen
Safety Interlock System
l Emergency Stop: Immediate shutdown; all functions disabled
l Low‑Speed Stirring: Allowed during barrel lift
l High‑Speed Dispersion: Enabled only after barrel fully lifted
l Operation Lock: Barrel cannot lower or open while mixing
l Vacuum Backflow Prevention: Buffer tank prevents pump oil backflow
l Inverter Protection: Overload, overcurrent, overvoltage, leakage, phase loss
l Lift Interlock: Barrel lift only when positioned; cannot descend under vacuum
l Anti‑Drop Lock: Prevents barrel fall
l Dry Mixing: Paddles rotate during lift
Other Notes
l Temperature Sensor: Pt100, barrel wall
l Bearings: High‑speed – imported; low‑speed – domestic
l Seals: O‑rings static, mechanical dynamic (domestic)
l Grease: Domestic
l Seal Oil: Imported
l Hydraulic Cylinder & Station: Domestic
l Valves: Domestic
l Vacuum Requirement: Customer‑supplied 15 L/s (2X‑15)
l Vacuum Holding: −0.098 MPa, ≥ −0.085 MPa /24 h
l Total Power: > 55 kW
l Weight: ≈ 6045 kg
l Dimensions: L 3302 × W 1640 × H 3305 mm
l Color: Off‑white
l Floor Load: 2000 kg/m²
III. Spare & Wear Parts List
|
No. |
Name |
Spec. |
Material |
Qty |
Remarks |
|
1 |
Lower‑Lid Seal Ring |
ΦD × ΦN |
Silicone |
1 |
Per supplier std. |
|
2 |
Sight Glass Seal Ring |
– |
Silicone |
2 |
Per supplier std. |
|
3 |
Feeding Port Gasket |
– |
Silicone |
1 |
Per supplier std. |
|
4 |
High‑Speed Mech. Seal |
C+SiC |
– |
1 |
Per supplier std. |
|
5 |
High‑Speed Timing Belt |
– |
Rubber |
1 set |
Per supplier std. |
|
6 |
Scraper Plate |
– |
Teflon |
1 |
Per supplier std. |
|
7 |
Sight Glass Lens |
– |
Tempered Glass |
2 |
Per supplier std. |
IV. Supporting Conditions
|
No. |
Item |
Standard Requirements |
|
1 |
Workshop Height |
> 4.0 m; adequate lift & maintenance space |
|
2 |
Door Size |
H > 4.0 m; W > 3.5 m |
|
3 |
Cooling Water |
Forced cooling recommended; hot water in winter |
|
4 |
Heating |
Room > 20 °C for smooth hydraulic operation |
|
5 |
Installation Space |
As per layout |
|
6 |
Air Source |
5 – 7 kgf/cm², 100 L/min |
|
7 |
Foundation |
Floor flatness ≤ 3/2000 mm; load > 2000 kg/m²; direct floor fixation |
|
8 |
Others |
No corrosive / explosive gases or liquids |
1 Standard exported package: Internal anticollision protection, external export wooden box packaging.
2 Shipping by express, by air, by sea according to customers' requirements to find the most suitable way.
3 Responsible for the damage during the shipping process, will change the damaged part for you for free.
DELIVERY TIME:15-20 days after confirming the order, detail delivery date should be decided according to
production season and order quantity.
Automatic Hydraulic Rolling Press Machine Battery Calender For Lithium Cell Production
Subscribe to us
ONLINE
Louis@lithmachine.com
+0086 15959378975
