Email:Louis@lithmachine.com
ItemNo :
LITH-DGZH500MOQ :
1Compliance:
CEWarranty:
2 yearsDelivery Time:
5 daysEmail :
Louis@lithmachine.com
650L High-Capacity Planetary Mixer for Battery Slurry and Glue Dispersion
Scope of Application
Mixing and dispersing of various common medium-to-high viscosity adhesives (powders and liquids), yielding uniformly mixed material.
|
Item |
Specification |
|
Designed Total Volume |
650 L |
|
Inner Diameter |
1000 mm |
|
Inner Depth |
830 mm |
|
Container Material |
304 stainless steel (in contact with material) |
|
Temperature Jacket Form |
Double-layer jacket on wall (heating/cooling, insulated); single-layer on bottom |
|
Temperature Jacket Inlet |
G1.5″ with quick-release union |
|
Jacket System |
Customer-supplied; recommended inlet water ≤ 8 °C, flow > 150 L/min |
|
Discharge Outlet |
DN80 plunger-type outlet at bottom |
|
Designed Operating Temperature |
−10 to +120 °C |
|
Barrel Structure |
Steel wheels, motorized movement, with turntable and rails |
|
Item |
Specification |
|
Operating Frequency |
5–50 Hz |
|
Mixing Power |
22 kW |
|
Mixer Speed |
2–23 rpm |
|
Mixer Diameter |
960 mm |
|
Mixer Type |
Two-blade anchor with PTFE wall & bottom scraper |
|
Mixer Material |
304 stainless steel |
|
Mixer Tip Speed |
0.1–1.3 m/s |
|
Number of Mixers |
1 |
|
Clearance to Wall |
20 ± 2 mm |
|
Clearance to Bottom |
10 ± 2 mm |
|
Item |
Specification |
|
Working Frequency |
5–50 Hz |
|
Dispersing Power |
22 kW × 2 units |
|
Disperser Speed |
160–1600 rpm |
|
Disperser Diameter |
250 mm |
|
Disperser Type |
Serrated disc |
|
Material |
304 stainless steel |
|
Tip Speed |
2–20 m/s |
|
Number of Discs |
2 per shaft |
|
Number of Shafts |
2 |
|
Item |
Specification |
|
Scraper Position |
Mounted on mixing anchor |
|
Scraper Material |
PTFE |
|
Scraper Speed |
Same as mixing speed |
|
Item |
Specification |
|
Material |
High-rigidity carbon steel |
|
Lifting Method |
Hydraulic cylinder |
|
Guide System |
Metal guide rods |
|
Lifting Stroke |
≤ 1100 mm |
|
Item |
Specification |
|
Top Vessel Material |
304 stainless steel |
|
Quick-Open Sight Port |
DN300 × 1 |
|
Liquid Inlets |
Flanged DN80 × 3, Flanged DN50 × 1 |
|
Powder Inlet |
DN200 × 1 |
|
Vent Port |
DN150 × 1 |
|
Sight Glasses |
DN100 tempered glass × 2 |
|
Vacuum + Breaker Port |
ISO clamp 1″ × 1 |
|
Nitrogen Inlet |
ISO clamp 1″ × 1 |
|
Pressure Sensor Port |
1 |
|
Exhaust Port |
ISO clamp 2″ × 1 |
|
Digital Vacuum Gauge Port |
M20 internal thread × 1 |
|
Spare Ports |
ISO clamp 2″ × 2 |
|
Item |
Specification |
|
Electrical Cabinet |
Houses VFDs and low-voltage components |
|
Manual Operation Panel |
Buttons, knobs, meters |
|
Power Supply |
3×380 V ± 5%, 50 Hz |
|
Control Method |
Electric + hydraulic control |
|
Drive & Speed Control |
VFD-based |
|
Cooling Method |
Air-cooled and liquid-cooled |
|
Operation Interface |
Touchscreen |
|
Digital Temperature Display |
Displays material temperature |
|
Emergency Stop |
1 button |
|
Alarm System |
Over-temperature alarm, stop, alarm cancel |
|
Speed Display |
On touchscreen |
|
Power Indicator |
1 indicator |
|
Timer |
Controls mixing and dispersing simultaneously |
|
HMI Configuration |
Controls integrated into touchscreen |
l Emergency Stop: Immediate shutdown; disables controls.
l Low-Speed Mixing Start: Mixer can operate while lowering beam.
l High-Speed Dispersing: Only operates when beam is fully lowered.
l Interlock During Operation: Beam cannot rise or lid open while running.
l Vacuum Return Prevention: Special buffer tank prevents pump oil backflow.
l Fault Stop: Inverter provides overload, overcurrent, overvoltage, leakage, phase-loss protection.
|
Item |
Specification |
|
Temperature Sensor |
Pt100 |
|
Thermometry |
Measures material and wall simultaneously |
|
Bearings |
Imported for high-speed parts, domestic for low-speed |
|
Seals |
O-rings for static; mechanical for rotary |
|
Lubricants |
Domestic grease; imported for mechanical seals |
|
Hydraulic Cylinder |
Domestic brand |
|
Hydraulic Station |
Domestic brand |
|
Valves |
Domestic brand |
|
Vacuum Requirement |
Customer must supply 45 L/s system (2×45) |
|
Vacuum Holding |
−0.098 MPa and ≥ −0.085 MPa for 24 h |
|
Main Power |
66 kW |
|
Total Weight |
~9500 kg |
|
Dimensions (L×W×H) |
3490×1900×2865 mm (raised height: 4215 mm) |
|
Color |
Yellow |
|
Floor Load Capacity |
2500 kg/m² |
|
No. |
Part Name |
Specification |
Material |
Quantity |
Remarks |
|
7 |
Top Lid Seal O Ring |
ΦD×ΦN |
FKM |
1 |
Standard for this model |
|
8 |
Sight Glass Seal Ring |
— |
FKM |
2 |
Standard for this model |
|
9 |
Feed Port Gasket |
— |
FKM |
1 |
Standard for this model |
|
10 |
High-Speed Mechanical Seal |
C+SiC |
Ceramic |
1 |
Standard for this model |
|
11 |
Scraper Plate |
— |
PTFE |
1 |
Standard for this model |
|
12 |
Sight Glass Window |
— |
Tempered |
2 |
Standard for this model |
|
No. |
Item |
Standard Requirement |
|
8 |
Workshop Height |
> 5.0 m; must allow beam lifting and maintenance; clean, level floor |
|
9 |
Door Opening Size |
Height > 3.2 m; Width > 2.5 m for machine access |
|
10 |
Cooling Water Supply |
Mandatory; forced cooling recommended; hot water needed in winter |
|
11 |
Heating |
Indoor temp > 20 °C in northern winter to prevent hydraulic oil solidification |
|
12 |
Installation Space |
As per layout drawings |
|
13 |
Air Pressure Supply |
5–7 kgf/cm², 100 L/min; for pneumatic pump operation |
|
14 |
Other |
No corrosive/toxic/explosive gases or liquids |
650L Material Pressing Machine
Model Number: TMAX-YLJ500
Applicable Scope
Material inside the barrel is discharged by pressing.
1. Matched Container Parameters
Container inner diameter: 1000mm
Container inner depth: 830mm
2. Structural Form
Rectangular frame structure
3. Lifting Method
Hydraulic cylinder lifting the inner frame and mixing barrel
4. Pressing Method
Double-acting hydraulic cylinder drives the pressing plate
4. Discharge Method
Bottom discharge, discharge from the rear of the equipment
6. Pressing Performance Parameters
l Pressing plate size: matched with 1000mm barrel
l Pressing intensity per unit area: 17kg/cm²
l Total output pressure: 122T
l Motor power: 11kW
l Plunger pump flow rate: L/min
l Hydraulic station cooling method: with accumulator, air-cooled cooling
l Pressing plate descent and rise control: foot switch
l Pressing plate material: chrome-plated carbon steel
l Pressing plate sealing method: fixed double sealing rings
7. Barrel Locking Method
Mechanical locking
8. Barrel Transfer Method
Barrel transferred with casters
9. Other Notes
l Total main machine power: ≤11kW
l Total equipment weight: approx. 4000kg; floor load: 1000kg/㎡
l Equipment dimensions: L×W×H (to be specified)
l Appearance color: Yellow
No. Name Specification Material Quantity Remarks
|
2 |
O-ring |
ΦD×ΦN |
Silicone |
1 |
Matched to model, per supplier standard |
PACKAGE:
1 Standard exported package: Internal anticollision protection, external export wooden box packaging.
2 Shipping by express, by air, by sea according to customers' requirements to find the most suitable way.
3 Responsible for the damage during the shipping process, will change the damage part for you for free.
DELIVERY TIME:15-20 days after confirming order,detail delivery date should be decided according to production season and order quantity
Precision Extrusion Single Side Slot Die Coating Machine For Battery Production
Subscribe to us
ONLINE
Louis@lithmachine.com
+0086 15959378975
