ItemNo :
LITH-4017ZMOQ :
1Compliance:
CEWarranty:
2 yearsDelivery Time:
5 daysSemi-Automatic Prismatic Cell Electrode Winding Machine
1. Equipment Function Description
This machine is primarily designed for the precision winding of prismatic lithium-ion battery cells. Its operational workflow is as follows: the operator manually feeds cathode and anode sheets into the winding module, interleaves them with separators, and performs winding in accordance with process specifications. Following this, the machine automatically attaches the termination tape and expels the wound cells.
2. Equipment Functions and Features
As shown in diagram:
1. Adopts a dual winding needle structure.
2. Manual electrode feeding – automatic winding – automatic needle changing – automatic tape application – automatic cell discharge.
3. Tape is applied longitudinally (termination tape parallel to the tabs); the tape is applied evenly, with precise position control and without stretching the cell; the process is stable and reliable.
4. The winding needle speed is adjustable.
5. Dual separator rolls with active unwinding; tension controlled by encoder speed feedback and high-precision pneumatic valves, allowing smooth tension adjustment during winding.
6. Equipped with an electrode dust removal device.
7. The cell can be finished with either electrode wrapping or separator wrapping.
8. The finished cell has no damage, core pulling, or misalignment issues.
9. Easy to operate; simple and fast size adjustments and specification changes.
3. Process Flow
This machine complies with the standard prismatic lithium-ion battery winding process, in which the separator completely wraps the anode, and the anode wraps the cathode. Process steps:
1. Separator pre-winding: uses heat-cutting separator technology to save pre-winding length.
2. Insert anode: manually guide the anode sheet into the winding section.
3. Insert cathode: manually guide the cathode sheet into the winding section.
4. Winding.
5. Turntable rotates to transfer to next station.
6. Separator cutting, termination tape application, and cell discharge.
4. Equipment Structure
1. This equipment consists of the winding unit, indexing unit, separator unwinding unit, electrode guiding unit, tape application unit, discharge unit, and control system.
2. Winding Unit (2 sets): consists of offset winding needles to ensure winding precision and facilitate needle replacement.
3. Indexing Unit (1 set): for converting between winding and tape application stations.
4. Separator Unwinding Unit (2 sets): separator rolls use active unwinding with pneumatic tension control.
5. Electrode Guiding Unit (2 sets): single-side adjustable for easy alignment.
6. Tape Application & Discharge Unit (1 set).
5. Technical Specifications
1. Separator width: 8–40 mm
¢ Fixed Needle: Width (2.4–6.0) mm, Thickness (2.5–3.0) mm
¢ Adjustable Needle: Width (6.0–17.0) mm, Thickness 5.5 mm
2. Material Specifications (unit: mm)
|
Material |
Length |
Width |
Thickness |
Inner Dia |
Outer Dia |
|
Cathode Sheet |
45–1000 |
6–38 |
0.1–0.2 |
|
|
|
Anode Sheet |
45–1000 |
6–38 |
0.1–0.2 |
|
|
|
Separator (Roll) |
Roll |
8–40 |
0.009–0.045 |
76.2 |
250 |
|
Termination Tape |
Roll |
6–15 |
0.01–0.035 |
76.2 |
150 |
3. Capacity: 8–16 pcs/min (depending on needle width, electrode length/width, and process requirements)
4. Winding Accuracy: Under the following conditions:
¢ Electrode width deviation < ±0.2 mm
¢ “S” bend deviation < ±1 mm/100 mm
¢ Separator roll cone deviation < ±0.2 mm
¢ Alignment precision:
n Separator deviation < ±0.5 mm
n Electrode deviation < ±0.5 mm
n Final product cut surface alignment < ±0.5 mm
n Capable of anode-wrapping-cathode and separator-wrapping-anode
5. Pass Rate: ≥98% (excluding non-equipment-related factors)
6. Technical Standards
|
Specification |
Value |
Remarks |
|
Input Power |
AC220V, 1KW, 50Hz |
|
|
Air Supply |
0.4–0.6 MPa |
|
|
Production Capacity |
8–16 PCS/min |
|
|
Equipment Weight |
Approx. 600 kg |
|
|
Machine Dimensions |
1400 mm × 1100 mm × 1500 mm |
(L×W×H), excluding electrode tray |
|
Winding Needle Spec. |
One set per machine |
As per customer selection |
|
Mechanical Configuration |
Machine Frame & Mounting Plate |
1 set |
|
Winding Needle Unit |
1 set |
|
|
Electrode Feeding Units |
2 sets |
|
|
Separator Feeding Units |
2 sets |
|
|
Tape Application Unit |
1 set |
|
|
Control System Specifications |
PLC |
PANASONIC – AFRX-C60T |
|
Touch Screen |
MCGS / WIGERLON, 7-inch true color |
|
|
Winding Motor |
YANKONG / LISAN – stepper or servo hybrid motor |
|
|
Tension Motor |
YANKONG / LISAN – stepper motor |
|
|
Sensors |
PANASONIC / DFC / DAOCHUAN |
|
|
Pneumatic Components |
AIRTAC / XINGHEN / AIRTAC |
|
|
Main Switch |
CHINT – Leakage protection switch |
|
|
Alarm System |
Fault stop with built-in program and one-button reset |
|
|
Accessories |
User Manual |
1 set |
|
Spare Parts |
1 set (refer to delivery list) |
1 Standard exported package: Internal anticollision protection, external export wooden box packaging.
2 Shipping by express, by air, by sea according to customers' requirements to find the most suitable way.
3 Responsible for the damage during the shipping process, will change the damaged part for you for free.
DELIVERY TIME:15-20 days after confirming the order, detail delivery date should be decided according to
production season and order quantity.
Subscribe to us
ONLINE
+86 13174506016
Louis@lithmachine.com
+86 18659217588
18659217588
