Email : Louis@lithmachine.com
ItemNo :
LITH-BST8-WAMOQ :
1Compliance:
CE CertifiedWarranty:
2 yearsDelivery Time:
5 daysEmail :
Louis@lithmachine.com
1. This tester can analyze polymer and cylindrical batteries from 0.1mA to 6 A, up to 5V.
2 The battery test system provides most applications in battery testing fields such as electrode materials research, battery performance test, small-scale battery formation, capability grading, battery pack testing and etc.
Specifications
|
Input Power |
AC 220V ±10% / 50Hz |
|
|
Resolution |
AD:16bit;DA:16bit |
|
|
Input Resistance |
≥1MΩ |
|
|
Input Power |
425W |
|
|
Channel Features |
Constant Current Source and Constant Voltage Source with Independent pairs of Closed-loop Structure |
|
|
Channel Control Mode |
Independent Control |
|
|
Voltage |
Per Channel Voltage Range |
Charge:25mV~5V;Discharge:1.0V~5V |
|
Accuracy |
± 0.05% of FS |
|
|
Stability |
0.05% of FS |
|
|
Current |
Per Channel Current Range |
Range1:0.5mA~0.1A;Range2:0.1A~6A |
|
Accuracy |
± 0.05% of FS |
|
|
CV cut-off current |
Range 1: 0.2mA Range2: 12mA |
|
|
Stability |
0.05% of FS |
|
|
Power |
Per Channel Output Power |
30W |
|
Stability |
± 0.1% of FS |
|
|
Time |
Current Response Time |
The Current gets to 6A Hardware Response Time is 1ms |
|
Step Time Range |
0.1s≤Single Step Time Range≤365*24 h, Time Form Support 00:00:00(h,min,s) |
|
|
Data Recording |
Record Condition |
Time:100ms |
|
Voltage U:10mV |
||
|
Current I:Range 1: 0.2mA Range2: 12mA |
||
|
Record Frequency |
10Hz |
|
|
Charge |
Charge Mode |
Constant Current Charge,Constant Voltage Charge, CC-CV Charge ,CP-Charge |
|
End Condition |
Voltage,Current,Relative Time,Capacity, |
|
|
Discharge |
Discharge Mode |
Constant Current Discharge CP-D CR-D |
|
End Condition |
Current,Current,Relative Time,Capacity, |
|
|
Pulse Model |
Charge |
Constant Current,Constant Power |
|
Discharge |
Constant Current,Constant Power |
|
|
Min Pulse Width |
500ms |
|
|
Pulse Number |
Single Pulse Step Support 32 different Pulse |
|
|
Charge r To Discharge |
One Pulse Step Can Support Continuous Charge And Discharge Change |
|
|
Stop Condition |
Voltage, Relative Time |
|
|
DCIR Testing |
Support Custom Access Point And Count The DCR |
|
|
Cycle |
Loop Measure Range |
1~65535 times |
|
Max Steps Per Loop |
254 |
|
|
Nested Loop |
Nested loop Function,Max Support 3 Layers |
|
|
Protection |
Software Protection |
Power-down Data Protection |
|
Setting Protection Condition,Setting Parameter:Low Voltage limit,Upper Voltage limit,Low Current limit,Upper Current limit,Delay Time |
||
|
Voltage and Current Testing Sample |
4-wire connecting |
|
|
Noise |
<85dB |
|
|
Data Management |
MySQL Database |
|
|
Communication Means |
TCP/IP Protocol |
|
|
Data Output |
EXCEL,TXT |
|
|
Communication Interface |
Ethernet Port |
|
|
Main Channels |
8 |
|
|
Channels |
Eight independent programmable channels Each channel can set different working modes and functions independently |
|
Programs & Software |
1.1 The software is included to set various working modes for measuring capacity and life cycle for all types of rechargeable batteries 1.2 Working modes Include constant current discharge, constant current charge, constant voltage charge, rest, cycles, etc. 1.3 Limited threshold conditions include voltage, current, time, capacity, negative voltage slope, etc. 1.4 With real-time monitoring windows and integrated graph/data windows, the testing process can be observed more directly and efficiently 1.5 During the test, the software will provide instructions and warnings for assistance |
|
Test Reports and Curves for analysis |
2.1 Different types of curves can be created by software base on user definition. (Voltage-time curve, current-time curve, capacity-voltage curve, loops times-charge/discharge capacity curve, loops times charge/ discharge efficiency curve, etc) 2.2 Data reports are created by software. User can easily compare the performance of the batteries tested in channels both visually and statistically |
|
Protection and Auto-recover |
If power failure occurs during testing, the system will shutdown all operating channels. Once power is recovered, the system will automatically resume those stopped channels and ensure that the test is normally conducted, so that no cases will lose any data. |
|
Battery Holders |
8 alligator clips with cable for universal connecting 8 spring load holders with adjustable length for measuring cylinder battery upto 70mm(H) 8 Polymer battery tester clamps for pouch cell testing |
|
Warranty |
One Year limited warranty with lifetime support |
|
Product Dimensions |
485mm(L) * 508mm(W) *263mm(H) |
Power Processing→Power Grinding→Vacuum Mixing→Electrode Coating→Roll Press→Sheet Cutting→Vacuum Drying→Ultrasonic Welding→Electrode Winding→Spot Welding→Grooving→Glove Box→Electrolyte Injection→Electrode Diffusion→Hydraulic Sealing→Battery Analyzer
Related Machine
|
|
|
|
|
|
|
Electrode Slitting |
Welding Power: 80-6500W optional |
Lab cylindrical cell grooving machine |
Manual Sealing or Pneumatic Sealing Machine |
8 Channel Battery Tester
|
|
|
PACKAGE:
1 Standard exported package: Internal anticollision protection, external export wooden box packaging.
2 Shipping by express, by air, by sea according to customers' requirements to find the most suitable way.
3 Responsible for the damage during the shipping process, will change the damage part for you for free.
DELIVERY TIME:15-20 days after confirming order,detail delivery date should be decided according to
production season and order quantity
Cylindrical Cell Hydraulic Sealer Sealing Machine Optional: 32650, 26650, 21700, 18650, CR123, AA, AAA
Semi-Auto Winding Machine For Electrode Assembly Of Cylindrical Battery
Subscribe to us
ONLINE
Louis@lithmachine.com
+0086 15959378975
